Motorsport Developments/Evolution Chips MSD380 remap available here at Dyna Tune increases the top end power of the MK3 Focus RS to 380PS, also boosting the stock torque to 550NM.
The factory rev limiter is retained, as are all the temperature protection features carefully programmed in by Ford, such as power limiting if coolant, oil, exhaust or charge temperatures get high. The ECU will actively lower your available throttle opening and boost pressures as well as add fuel to cool things down until such time as the temperatures are back within safety parameters.
Some tuners remove all this to achieve their power – Take care out there.
The package includes the supply and fitment of:
•Full Engine Management Diagnostics Check
•Evolution Chips MSD380 ECU calibration
Options Available:
•Decat MIL Eliminated (For vehicle with a De-Cat fitted)
•Launch Control RPM setpoint options of 4000 / 4500 / 5000 rpm
•Stop / Start disable
•Eco shift light disable
All for only £449 Inc VAT*
Power graph from a mk3 focus rs, msd 380 tune, 411 lb/ft (557Nm) of torque and 361 bhp (366PS) at the hubs
*Dyno runs and graphs of power and torque along with AFR and Boost levels are available at an additional cost.